Olicom 2 User Manual download pdf (Page 27)

SY-P4I865PE Lite DRAGON 2

Quick Start Guide

Quick Trouble shoot tips

Boot-up Issues

The system does not power-up, no beeping sound heard and the CPU fan does not

turn on.

1. Check if the power cord is plugged in the power source.

2. Check if the power is connected to the M/B. (both the ATX 12V and the ATX connector)

3. Check if the cable of the case power button is connected to the M/B power button

connector (see connectors and plug-ins in this quick start guide for more info).

4. Make sure the power supply is not defective. Change the power supply. The minimum

should be 350 watts.

5. Remove the M/B from the case and test the system. The M/B might be shorted to the

case.

The system powers up, no video, no beeping sound heard, but the CPU fan is

turning.

1. Clear the CMOS ram. (JP5 connector, see Quick start guide for more info on how to clear

the CMOS).

2. Check all the jumper settings on the M/B.

3. Check if the CPU is ok by using another CPU (check the Quick start guide for CPU

supported on this M/B).

4. Check if the power supply is ok. The minimum should be 350 watts.

5. Make sure the CPU fan is connected to CPUFAN1 connector.

6. Remove the M/B from the case and test the system. The M/B might be shorted to the

case.

7. Change the VGA card. If you have used a 3.3V AGP card, the M/B might be damaged.

The system powers up, no video, but beeping is heard.

1. Clear the CMOS ram. (JP5 connector, see Quick start guide for more info on how to clear

the CMOS).

2. Check all the jumper settings on the M/B.

3. Check the memory module and the VGA card inserted properly in the M/B.

4. If yes, change the memory module, it might be defective. Make sure the memory

specification is supported by the M/B. (for more info on this, check our FAQ on our

website).

5. Change the VGA card. Make sure the AGP card is 1.5v, not 3.3v.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 33 34

No comments

Olicom 2 User Manual Page 27